Max. Wire Bundle 1.31 in (33.0 mm) Dia.
AGT-FD Series Ground Fault Transducer w/Analog Output
AGT-FD Series Ground Fault Transducer detect faults to earth from 0 mA to 100 mA and produces an output signal of 0–10 VDC in proportion to the amount of current passing to ground. The output is equal to the RMS value of the earth leakage. The AGT-FD series of Ground Fault Transducers can also be used to measure and monitor any low value AC circuit current by passing just one of the conductors through the sensing window.
ANALOG OUTPUT SIGNAL
- 0–5 or 0–10 VDC proportional to 0–100 mA.
- Sensing window large enough to monitor 100 amp circuits.
EXTERNALLY POWERED
- Low power consumption (< 2 VA).
- 24 Volt AC or DC (20–30 V).
FACTORY CALIBRATED
- Warrantied to stay accurate for five years minimum.
- Compatible with most PLCs, panel meters and other controllers.
LARGE SOLID-CORE CASE
- Large sensing window provides ample space for multiple conductors.